Table of Contents
Introduction
The Fob Draft System is a method of beer dispensing that utilizes a small plastic disc, called a fob, to regulate the flow of beer from the keg to the tap. This system helps to prevent over-pouring and waste, while also ensuring that the beer is served at the proper temperature and carbonation level. The Fob Draft System is commonly used in bars, restaurants, and other establishments that serve draft beer.
Benefits of Using Fob Draft System for Homebrewing
Homebrewing is a popular hobby for many beer enthusiasts. It allows them to experiment with different ingredients and create unique flavors that cannot be found in commercial beers. However, homebrewing can be a time-consuming and challenging process, especially when it comes to measuring and dispensing the beer. This is where the Fob Draft System comes in handy.
The Fob Draft System is a device that helps homebrewers to dispense beer more efficiently and accurately. It is a simple yet effective tool that can make a significant difference in the quality of the beer. Here are some of the benefits of using the Fob Draft System for homebrewing.
Firstly, the Fob Draft System helps to reduce waste. When beer is dispensed from a keg, there is always some foam that is produced. This foam is not only a waste of beer, but it can also affect the taste and quality of the beer. The Fob Draft System helps to eliminate this problem by using a float that stops the flow of beer when the keg is empty. This means that there is no more wasted beer, and the beer that is dispensed is of a higher quality.
Secondly, the Fob Draft System helps to maintain the carbonation level of the beer. Carbonation is an essential aspect of beer, as it affects the taste, aroma, and mouthfeel of the beer. The Fob Draft System uses a pressure regulator that ensures that the carbonation level of the beer is consistent throughout the dispensing process. This means that the beer will taste the same from the first pour to the last.
Thirdly, the Fob Draft System helps to reduce the amount of cleaning required. When beer is dispensed from a keg, there is always some residue left behind in the lines and faucets. This residue can lead to bacterial growth and affect the taste and quality of the beer. The Fob Draft System uses a self-cleaning mechanism that flushes out the lines and faucets after each use. This means that there is less cleaning required, and the beer is of a higher quality.
Fourthly, the Fob Draft System is easy to use. It does not require any special skills or knowledge to operate, and it can be installed in a matter of minutes. This means that homebrewers can spend more time brewing and less time worrying about dispensing the beer.
Finally, the Fob Draft System is cost-effective. It is a one-time investment that can save homebrewers money in the long run. By reducing waste, maintaining carbonation, and reducing cleaning requirements, homebrewers can save money on ingredients, equipment, and cleaning supplies.
In conclusion, the Fob Draft System is a valuable tool for homebrewers. It helps to reduce waste, maintain carbonation, reduce cleaning requirements, and is easy to use. It is a cost-effective investment that can make a significant difference in the quality of the beer. Homebrewers who are looking to improve their brewing process should consider investing in the Fob Draft System.
How to Install Fob Draft System in Your Kegerator
If you’re a beer enthusiast, you know that there’s nothing quite like a cold, fresh pint of beer straight from the tap. And if you’re lucky enough to have a kegerator at home, you can enjoy that experience anytime you want. But if you’re looking to take your kegerator to the next level, you might want to consider installing a fob draft system.
A fob draft system is a device that helps prevent foam from forming in your beer lines. Foam can be a real problem when you’re pouring beer from a kegerator, and it can be caused by a number of factors, including temperature, pressure, and the length of the beer lines. A fob draft system helps regulate these factors and ensures that you get a perfect pour every time.
Installing a fob draft system in your kegerator is a relatively simple process, but it does require some basic plumbing skills. Here’s a step-by-step guide to help you get started:
Step 1: Gather Your Materials
Before you begin, you’ll need to gather all the materials you’ll need for the installation. This will include a fob draft system kit, which should include a fob, a shank, a tailpiece, a nut, and a washer. You’ll also need a drill, a wrench, a screwdriver, and some Teflon tape.
Step 2: Choose Your Location
The first step in installing a fob draft system is to choose the location where you want to install it. You’ll need to find a spot on your kegerator where you can drill a hole for the shank. This should be a spot that’s easily accessible and close to your beer lines.
Step 3: Drill the Hole
Once you’ve chosen your location, you’ll need to drill a hole for the shank. Use a drill bit that’s the same size as the shank, and be careful not to drill too deep. You don’t want to damage any of the internal components of your kegerator.
Step 4: Install the Shank
Once you’ve drilled the hole, you can install the shank. Insert the shank into the hole and secure it with the nut and washer. Use a wrench to tighten the nut, but be careful not to overtighten it.
Step 5: Attach the Fob
Next, you’ll need to attach the fob to the shank. The fob is a small device that helps regulate the flow of beer through the system. Attach the tailpiece to the fob, and then attach the fob to the shank. Use a wrench to tighten the connections, but again, be careful not to overtighten them.
Step 6: Connect the Beer Lines
Finally, you’ll need to connect the beer lines to the fob draft system. Use Teflon tape to wrap the threads on the tailpiece, and then attach the beer lines to the tailpiece. Make sure the connections are tight and secure.
Once you’ve completed these steps, you should be ready to start pouring beer from your kegerator with your new fob draft system. You may need to adjust the pressure and temperature settings on your kegerator to get the perfect pour, but with a little experimentation, you should be able to find the right balance.
In conclusion, installing a fob draft system in your kegerator is a great way to improve the quality of your beer and ensure that you get a perfect pour every time. While the installation process may seem a bit daunting at first, it’s actually quite simple and can be completed in just a few steps. So if you’re looking to take your kegerator to the next level, consider installing a fob draft system today.
Troubleshooting Common Issues with Fob Draft System
Fob Draft System is a popular method of dispensing beer in bars and pubs. It is a reliable and efficient system that ensures the beer is served at the right temperature and with the right amount of carbonation. However, like any other system, it can experience some issues that can affect its performance. In this article, we will discuss some of the common issues with Fob Draft System and how to troubleshoot them.
One of the most common issues with Fob Draft System is foaming. Foaming occurs when the beer is dispensed too quickly, causing the carbon dioxide to escape from the beer and form bubbles. This can be caused by a number of factors, including a dirty or damaged Fob, a clogged line, or incorrect pressure settings. To troubleshoot this issue, start by checking the Fob for any damage or dirt. If it is dirty, clean it thoroughly with a cleaning solution. If it is damaged, replace it. Next, check the line for any clogs or obstructions. If there are any, clear them out. Finally, check the pressure settings and adjust them if necessary.
Another common issue with Fob Draft System is flat beer. Flat beer occurs when there is not enough carbonation in the beer. This can be caused by a number of factors, including a dirty or damaged Fob, a clogged line, or incorrect pressure settings. To troubleshoot this issue, start by checking the Fob for any damage or dirt. If it is dirty, clean it thoroughly with a cleaning solution. If it is damaged, replace it. Next, check the line for any clogs or obstructions. If there are any, clear them out. Finally, check the pressure settings and adjust them if necessary.
A third common issue with Fob Draft System is a slow pour. A slow pour occurs when the beer is dispensed too slowly, causing the customer to wait longer than necessary for their drink. This can be caused by a number of factors, including a dirty or damaged Fob, a clogged line, or incorrect pressure settings. To troubleshoot this issue, start by checking the Fob for any damage or dirt. If it is dirty, clean it thoroughly with a cleaning solution. If it is damaged, replace it. Next, check the line for any clogs or obstructions. If there are any, clear them out. Finally, check the pressure settings and adjust them if necessary.
A fourth common issue with Fob Draft System is a leaking keg. A leaking keg occurs when the beer is leaking from the keg, causing a mess and wasting beer. This can be caused by a number of factors, including a damaged keg, a damaged Fob, or a damaged line. To troubleshoot this issue, start by checking the keg for any damage or leaks. If there are any, replace the keg. Next, check the Fob for any damage or leaks. If there are any, replace the Fob. Finally, check the line for any damage or leaks. If there are any, replace the line.
In conclusion, Fob Draft System is a reliable and efficient method of dispensing beer in bars and pubs. However, like any other system, it can experience some issues that can affect its performance. The most common issues with Fob Draft System are foaming, flat beer, slow pour, and leaking keg. To troubleshoot these issues, start by checking the Fob, line, and keg for any damage or dirt. If there are any issues, replace or clean the affected parts. Finally, check the pressure settings and adjust them if necessary. By following these troubleshooting steps, you can ensure that your Fob Draft System is working properly and serving the best beer possible.
Comparison of Fob Draft System vs Traditional Tap System
The Fob Draft System is a relatively new technology that has been introduced to the beer industry. It is a system that uses a small device called a fob to regulate the flow of beer from the keg to the tap. The fob is placed in the beer line between the keg and the tap, and it works by creating a vacuum that prevents the beer from flowing until the tap is opened. This system has been gaining popularity in recent years, and many bars and restaurants are now using it instead of the traditional tap system.
One of the main advantages of the Fob Draft System is that it helps to maintain the quality of the beer. With the traditional tap system, the beer can become contaminated with bacteria and other impurities if the lines are not cleaned regularly. This can result in off-flavors and a decrease in the overall quality of the beer. The Fob Draft System, on the other hand, prevents the beer from coming into contact with the air and other contaminants, which helps to maintain its freshness and flavor.
Another advantage of the Fob Draft System is that it reduces waste. With the traditional tap system, it is common for bartenders to pour out the first few ounces of beer from each keg to get rid of any sediment or impurities that may have settled in the lines. This can result in a significant amount of wasted beer over time. With the Fob Draft System, however, the beer is automatically purged of any sediment or impurities when the tap is opened, which means that there is no need to waste any beer.
In addition to these benefits, the Fob Draft System also offers greater control over the dispensing of beer. With the traditional tap system, it can be difficult to control the flow of beer, which can result in over-pouring or under-pouring. This can lead to inconsistencies in the amount of beer that is served, which can be frustrating for both the bartender and the customer. The Fob Draft System, however, allows for precise control over the flow of beer, which helps to ensure that each pour is consistent and accurate.
Despite these advantages, there are some drawbacks to the Fob Draft System that should be considered. One of the main drawbacks is that it can be more expensive to install and maintain than the traditional tap system. The fobs themselves can be costly, and they require regular cleaning and maintenance to ensure that they are functioning properly. Additionally, the Fob Draft System may not be suitable for all types of beer, as some styles may require a different dispensing method to achieve the desired flavor and carbonation.
In conclusion, the Fob Draft System offers several advantages over the traditional tap system, including improved beer quality, reduced waste, and greater control over dispensing. However, it is important to consider the potential drawbacks, such as the higher cost and the need for regular maintenance. Ultimately, the decision to use the Fob Draft System or the traditional tap system will depend on a variety of factors, including the type of beer being served, the budget of the establishment, and the preferences of the customers.
Tips for Maintaining and Cleaning Your Fob Draft System
Fob Draft System: Tips for Maintaining and Cleaning Your System
A fob draft system is a popular method of dispensing beer in bars and pubs. It is a system that uses a small device called a fob to control the flow of beer from the keg to the tap. The fob ensures that the beer is dispensed at the right temperature and pressure, and it also prevents the beer from becoming too foamy. However, like any other system, a fob draft system requires regular maintenance and cleaning to ensure that it works properly. In this article, we will discuss some tips for maintaining and cleaning your fob draft system.
1. Clean the Lines Regularly
The first and most important tip for maintaining your fob draft system is to clean the lines regularly. Beer lines can become dirty over time, and this can affect the taste and quality of the beer. To clean the lines, you will need to use a cleaning solution that is specifically designed for beer lines. You can purchase these solutions from your local homebrew store or online. Follow the instructions on the package carefully, and make sure that you rinse the lines thoroughly after cleaning.
2. Check the Fob Regularly
The fob is a small device that is attached to the beer line. It is responsible for controlling the flow of beer and preventing it from becoming too foamy. It is important to check the fob regularly to ensure that it is working properly. If the fob is not working correctly, it can cause the beer to become too foamy or not dispense at all. To check the fob, simply remove it from the beer line and inspect it for any signs of damage or wear. If you notice any issues, you may need to replace the fob.
3. Clean the Tap Regularly
The tap is the part of the fob draft system that dispenses the beer. It is important to clean the tap regularly to ensure that it is working properly and to prevent any contamination. To clean the tap, you will need to disassemble it and soak it in a cleaning solution. Make sure that you rinse the tap thoroughly after cleaning and reassemble it properly.
4. Check the CO2 Pressure
The CO2 pressure is an important part of the fob draft system. It is responsible for maintaining the right pressure in the keg and ensuring that the beer is dispensed at the right temperature and pressure. It is important to check the CO2 pressure regularly to ensure that it is set correctly. If the pressure is too high or too low, it can affect the taste and quality of the beer. To check the CO2 pressure, you will need a pressure gauge. Simply attach the gauge to the CO2 regulator and adjust the pressure as needed.
5. Replace the Keg Seals
The keg seals are an important part of the fob draft system. They are responsible for keeping the beer fresh and preventing any contamination. Over time, the keg seals can become worn or damaged, and they may need to be replaced. To replace the keg seals, simply remove the old seals and replace them with new ones. Make sure that you clean the keg thoroughly before replacing the seals.
In conclusion, a fob draft system is a great way to dispense beer in bars and pubs. However, it requires regular maintenance and cleaning to ensure that it works properly. By following these tips, you can keep your fob draft system in good condition and ensure that your customers enjoy the best possible beer.
Q&A
1. What is a Fob Draft System?
A Fob Draft System is a type of beer dispensing system that uses a small device called a fob to prevent beer from flowing when the keg is empty or the line is compromised.
2. How does a Fob Draft System work?
The Fob Draft System works by using a small float inside the fob that rises when the beer level drops. This triggers a valve to close, preventing any air or gas from entering the line and causing foaming or contamination.
3. What are the benefits of using a Fob Draft System?
The benefits of using a Fob Draft System include reduced waste, improved beer quality, and increased efficiency. It also helps to prevent over-pouring and ensures that every glass of beer is consistent.
4. What types of businesses typically use Fob Draft Systems?
Fob Draft Systems are commonly used in bars, restaurants, and other establishments that serve draft beer. They are also popular in breweries and taprooms.
5. How do you maintain a Fob Draft System?
To maintain a Fob Draft System, it is important to regularly clean the lines and replace any worn or damaged parts. It is also important to properly store and handle kegs to prevent contamination.
Conclusion
Conclusion: The Fob Draft System is a useful tool for breweries and bars to accurately measure and dispense beer. It helps to reduce waste and improve efficiency in the beer dispensing process. Overall, it is a valuable investment for businesses in the beer industry.